NEC Express5800/R310g-E4, Руководство пользователя

Страница: 71 / 84

2. BIOS Setup Utility (SETUP)
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide 71
Chapter 3 Setup
2.4
Cases that Require Changes
Use SETUP to change a parameter in the following cases. Other than cases described below, do not change
the settings. A list of SETUP parameters and factory settings are described in
Chapter 3 (1. System BIOS) in
" Maintenance Guide ".
Category Description To be changed Remark
Basic Change date and time Main

System Date
Main

System Time
On/Off NumLock at power
ON Boot

Bootup Numlock State

ON
Hide the NEC logo during
POST
Boot

Quite Boot

Disabled Pressing <Esc> key hides
the NEC logo tentatively.
Option
board Enable Option ROM Scan of
installed option board Advanced

PCI Configuration

PCI
Device Controller and Option ROM
Settings

PCIx Slot Option ROM

Enabled
X is PCI slot number of the
option board
Boot
To perform physical
formatting, set a Legacy
BIOS mode temporarily. Boot

Boot Mode

Legacy For physical formatting, see
Chapter 3 ( 3 .3 Physical
Formatting of the Hard Disk
Drive) in "Maintenance
Guide".
To perform physical
formatting, set a Legacy
BIOS mode temporarily and
reset. Boot

Boot Mode

UEFI
Change the boot order of
devices Boot

Boot Option Priorities

Change the boot priority
When you use
EXPRESSBUILDER, set
the highest priority to
CD/DVD.
Security
Set a password Security

Administrator Password

Set a password
Security

User Password

Set a
password
If password is set, a
message requesting
password is displayed at
the next SETUP execution.
Restrict bootup by entering
password Security

Password on Boot

Enabled
Can be selected when
password is set.
UPS
Power link When the server is supplied
with power from UPS, always
turn on the power. Server

Power Control
Configuration

AC-LINK

Power
ON
If the server is turned off by
using POWER switch, leave it
OFF even when UPS
supplies power. Server

Power Control
Configuration

AC-LINK

Last
State
Keep the power OFF even
when UPS supplies power. Server

Power Control
Configuration

AC-LINK

Stay off