NEC Express5800/R310g-E4, Руководство пользователя

Страница: 62 / 84

2. Installation and Connection
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide 62
Chapter 2 Preparations

When the device is not Plug and Play device, turn off the server and devices to be connected before
connecting.

Fix the power cord or interface cable with cable ties.

Make sure that no pressure is applied on the plug of power cord.
2.4.1
Connecting to a uninterruptible power supply (UPS)
To connect the power cord of the server to the uninterruptible power supply (UPS), use the connector output on
the rear of the UPS. For details, refer to the manual supplied with the UPS.
If you want to control the power of server with the output of UPS, change the following BIOS settings.
[Server] - [Power Control Configuration] - [AC-LINK]
Select Power On to perform automatic operations by using the UPS.
See the following for details.
Chapter 3 (2. BIOS Setup Utility (SETUP)) .
Chapter 3 (1. System BIOS) in Maintenance Guide
Option slot
Overload protection
reset button
Connector outputs
Input connector
(NEMA5-15P)
Voltage sensitivity setting button
Computer interface port (COM)
TVSS device connector
Example
Universal Serial Bus (USB) port