NEC Express5800/R310g-E4, Руководство пользователя

Страница: 45 / 84

2. Installation and Connection
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide 45
Chapter 2 Preparations
Installing the chassis
Follow the steps below to set the 4U chassis to the rack.
1. If the rack has front and rear doors, open them.
Tips
Refer to the instruction manual that comes with the rack.
2. Install the brackets from the rear side of the rack.
Install the brackets with its flat side facing inside. Place them with four pan head screws with washers
that come with the server symmetrically. Tighten the screws temporarily.
3. Attach two cage nuts symmetrically into the second square holes from the bottom of chassis.
4U
(top of chassis)
Panhead screws
with washers
Bottom of chassis
Brackets (flat sides are facing inside)
Panhead screws
with washers
Plain washer
4U (Top of
chassis)
4U (Bottom
of chassis)
3U
2U
1U
Cage nuts
Attached to the second holes from the bottom of chassis