Inspur Yingxin NP3020M2 Manual Download

Page: 1 / 51

Dear User of Inspur Yingxin Server,

Heartfelt thanks for your use of Inspur Yingxin Server!

This manual introduces the technical characteristics, the system instal-

lation and setup of the server to help you to fully understand and expediently
use this server.

Please deliver the package of our product to the waste recycling station

for recycling, in favor of pollution prevention and humankind’s bene

This manual is the property of the Inspur Group Co., Ltd.
This User Manual is not to be copied by any group or person in any

manner without the consent of Inspur Group Co., Ltd. The Inspur Group
Co., Ltd. reserves the right of revising this manual momentarily.

Any alteration about the content of this manual will not be informed.
Please contact Inspur Group Co., Ltd. if you have any questions or ad-

vice about this manual.

Inspur Group Co., Ltd.
August, 2011

“Inspur” is registered trademark of the Inspur Group Co., Ltd.
Other trademarks belong to other corresponding registered companies.

Summary of Contents for Yingxin NP3020M2




















































Search results

Summary of Contents for Yingxin NP3020M2

Reviews:

Related manuals for Yingxin NP3020M2

Brands by name

Popular brands

Inspur Yingxin NP3020M2, Manual

Search results

Summary of Contents for Yingxin NP3020M2

Reviews:

Related manuals for Yingxin NP3020M2

Brands by name

Popular brands