1. Installing Internal Optional Devices
Express5800/R120e-2E User’s Guide
92
Chapter 2 Preparations
Note
•
When installing an optional RAID Controller, start the BIOS Setup utility, select
PCI Configuration
from the
Advanced
menu, and then make sure that the
parameter of
PCI Slot xx ROM
(
xx
is PCI slot number) is set to
Enabled
.
•
When connecting a RAID Controller, set the boot priority to 8th or higher in the
Boot menu of the BIOS Setup utility. If the setting is 9th or lower, the configuration
menu for RAID Controllers cannot be launched.
1.13.4
Removal
To remove a riser card, reverse the installation procedure. Hold the card firmly and remove it. When removing
it, have another person hold the server so that the server does not move.
If needed, run SETUP utility, and then specify the boot order from the
Boot
menu. For details about the
Boot
menu, refer to
Chapter 2 (1. System BIOS)
in "
Maintenance Guide
".
If using the server while the card is removed, attach the slot cover that comes with the riser card.
