1. Turning on the Server
Express5800/R120e-2E User’s Guide
150
Chapter 3 Setup
5.
After a while, the following message is displayed on the screen.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
By pressing the designated function key following messages, you can call the functions below upon
completion of POST.
<F2> key: Run BIOS Setup Utility (SETUP). For information on the SETUP, refer to
Chapter 2 (1.
System BIOS)
in "
Maintenance Guide
"
.
<F3> key: Run EXPRESSBUILDER from Internal Flash Memory (optional). For information on
EXPRESSBUILDER, refer to
Chapter 3 (4. EXPRESSBUILDER)
.
Note
•
If the optional Internal Flash Memory is not installed in the system, <F3> key
message will not be displayed.
•
<F3> key must be pressed within 5 seconds of the message being displayed.
•
Note that the server will not boot from Internal Flash Memory even if it is specified
to do so by pressing <F3> key, as long as a bootable CD/DVD-ROM is set on the
drive.
<F4> key: Run Offline Tools. For information on Offline Tools, refer to Chapter 1 Maintenance (9.
Offline Tools) in "Maintenance Guide".
<F12> key: Boot from network.
If a controller which has its dedicated BIOS such as a RAID Controller board is installed, a message that
prompts you to start the dedicated utility to set each board is displayed.
Example: If an optional RAID Controller is installed
Press <Ctrl> <H> for Web BIOS
The utility starts by pressing <Ctrl> + <H> keys.
For details on the utility, refer to the manual supplied with each optional board.
Depending on the configuration, the message "Press Any Key" might appear to prompt a key entry.
This is a behavior of the BIOS of the optional board. Continue to operate after checking the manual of
the optional board.
The OS starts when POST is completed.
1.1.2
POST error messages
When POST detects an error, it displays an error message on the screen or beeps for some errors. For
descriptions of error messages, causes, and countermeasures, refer to
Chapter 3 (1. POST Error Message)
in
"
Maintenance Guide
".
Important Take notes on the messages displayed before consulting with your
maintenance service company. Alarm messages are useful information for
maintenance.
