NEC Express5800/1020Ba Скачать руководство пользователя страница 95

Страница: 95 / 142

9. NOTES

During the Video Viewer, some problems (listed below) might occur. For problem resolution,
read the following NOTES.

a) Can not boot up Video Viewer

Confirm proxy setting of the Java Web Start (See 2.2.6.2

Environment

- d) Java VM

for more information).

Confirm that the CPU Blade is up. If not, Video Viewer can not be started.

b) Displayed image is incorrect or delayed.

Confirm the color setting on the client PC (see 2.2.6.2

Environment

- e) Color

configuration for more information).

c) White and gray characters are obscure.

Turn down contrast using “Manual Video Adjust” (see 2.2.6.3

Using Video Viewer

6. “Tools” Menu - b) Contrast, Brightness for more information).

d) Screen turned Solid-gray in full-screen mode, and can not be refreshed.

Terminate Video Viewer. Configure the screen resolution of the Host and client PC
at the recommended settings or the same settings. After re-configured, enable
full-screen mode again (See 2.2.6.3

Using Video Viewer

- 4. “View” Menu -

Full

Screen

for more information).

e) Can not change the resolution setting in full-screen mode

Configure the screen resolution setting, and then enable full-screen mode (See
2.2.6.3

Using Video Viewer

- 4. “View” Menu -

Full Screen

for more information).

f) Can not set color at gray

Confirm Background Refresh setting. If this is enabled, gray can not be set (see
2.2.6.3

Using Video Viewer

- 6. “Tools” Menu -

Session Option

- b) General tab for

more information).

2-61

Содержание Express5800/1020Ba















































































































































Результаты поиска

Содержание Express5800/1020Ba

Отзывы:

NEC Express5800/1020Ba, Руководство пользователя, Страница: 95 / 142

Результаты поиска

Содержание Express5800/1020Ba

Отзывы: