5. Troubleshooting
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
29
Chapter 1 Maintenance
5.3
Problem of Installing OS
[?]
Unable to install OS
Is the Hard Disk Drive properly installed?
→
Make sure that the Hard Disk Drive is installed securely and that cables are properly connected.
Did you configure the RAID Controller?
→
For the RAID System, use EXPRESSBUILDER or a RAID Configuration Utility (LSI Software RAID
Configuration Utility, WebBIOS) to properly configure the RAID Controller before installing OS.
Did you create a Logical Drive?
→
For the RAID System, create a Logical Drive using EXPRESSBUILDER, LSI Software RAID
Configuration Utility, WebBIOS to install OS.
[?]
Unable to install Windows
Have you checked precautions for installation?
→
For installing OS, see "
Installation Guide (Windows)
".
[?]
A product key was not requested
→
If you install using the backup DVD-ROM, entering the product key is not required. If installing using a
DVD-ROM other than the backup DVD-ROM, a screen for entering the product key is displayed, during
OS installation, and, before the MICROSOFT SOFTWARE LICENSE TERMS dialog box, which
displays after OS installation. Follow the on-screen instructions to enter the product key.
[?]
The following devices are indicated as faulty devices in a Windows Server 2012 Server Core installation
environment
•
SM Bus Controller
→
There is no operational problem.
[?]
Unable to access the partition which was previously created after reinstalling while several disks are
connected
→
For details, refer to the Microsoft website below:
[?]
When Windows Server 2012 is installed while several disks are connected, the system partition and the
boot partition (350 MB) are sometimes created in another disk
→
For details, refer to the Microsoft website below:
[?]
When Windows Server 2008 R2 is installed while several disks are connected, the system partition and
the boot partition (100 MB) are sometimes created in another disk
→
For details, refer to the Microsoft website below:
