1. POST Error Message
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
139
Chapter 3 Appendix
(3) Error messages on a virtual LCD
You can confirm the error messages by the EXPRESSSCOPE Engine 3 (BMC) web browser window. For
details, see "
EXPRESSSCOPE Engine 3 User’s Guide
".
The table below shows the error messages displayed on upper and lower lines, descriptions, and recommended
actions.
•
Messages displayed on an upper LCD line
(1/2)
BIOS Message on
Upper LCD Line
Description Action
XX POST Started...
POST is running. "
XX
" is the POST
running code.
This is not an error.
XX BIOS Rev YYYY
POST is running. "
XX
" is the POST
running code. "
YYYY
" is the system
BIOS version.
This is not an error.
POST Completed
Successfully
POST completes normally.
This is not an error.
POST ERROR XXXX
Error XXXX was detected during
POST.
Check the error message which appears on-screen,
and take the appropriate action for each error.
No Available
Memory in System
No available memory in the server.
Make sure that the memory is correctly installed.
Error Pause in POST
An error occurred during POST.
Check the error message which appears on-screen,
and take the appropriate action for each error.
Entering BIOS
SETUP MENU
Running BIOS SETUP MENU.
This message disappears when SETUP operation is
completed.
Waiting for normal
temperature
A temperature abnormality was
detected inside the server.
Lower the room temperature or turn off the power to
cool the server to room temperature before starting up
the server. If this abnormality continues to occur,
check if a cooling fan has failed. If the same error still
continues to occur, contact your sales representative.
BIOS Recovery
Running
BIOS recovery is in progress.
Wait until the BIOS recovery process completes.
BIOS Updater
Running
BIOS update is in progress.
Wait until the BIOS update process completes.
Message displayed on
upper LCD line
Message sent from BIOS
Message displayed on lower
LCD line
Message sent from BMC
