NEC EXP803, Руководство по обслуживанию

Страница: 182 / 219

1. POST Error Message
Express5800/R120f-1E Maintenance Guide
182
Chapter 3 Appendix
Error Message Cause Solution
9040 PEI_CPU_SELF_TEST_FAILED
An error was detected in CPU
initialization. Contact your sales representative.
9041 Detected CPU Error on CPU #1
An error was detected on CPU #1.
9042 Detected CPU Error on CPU #2
An error was detected on CPU #2.
9060 PEI_CPU_MISMATCH
CPU #1 and #2 are not the same
type.
9080 Link in Slow Speed Made
between CPU1 and CPU2.
Low-speed mode was detected on
bus between CPU1 and CPU2.
9081 Link Failure between CPU1
and CPU2
Connection failure was detected on
bus between CPU1 and CPU2.
9082 Link width Error between
CPU1 and CPU2
Connection decline was detected on
bus width between CPU1 and
CPU2.
9E80 Forced to use CPU with
error.
An error was detected in CPU, but
the CPU was forcedly enabled.
A001 Memory Error detected in
CPU1_DIMM1
An error was detected in
CPU1_DIMM1.
A002 Memory Error detected in
CPU1_DIMM2
An error was detected in
CPU1_DIMM2.
A003 Memory Error detected in
CPU1_DIMM3
An error was detected in
CPU1_DIMM3.
A004 Memory Error detected in
CPU1_DIMM4
An error was detected in
CPU1_DIMM4.
A005 Memory Error detected in
CPU1_DIMM5
An error was detected in
CPU1_DIMM5.
A006 Memory Error detected in
CPU1_DIMM6
An error was detected in
CPU1_DIMM6.
A007 Memory Error detected in
CPU1_DIMM7
An error was detected in
CPU1_DIMM7.
A008 Memory Error detected in
CPU1_DIMM8
An error was detected in
CPU1_DIMM8.
A00D Memory Error detected in
CPU2_DIMM1
An error was detected in
CPU2_DIMM1.
A00E Memory Error detected in
CPU2_DIMM2
An error was detected in
CPU2_DIMM2.
A00F Memory Error detected in
CPU2_DIMM3
An error was detected in
CPU2_DIMM3.
A010 Memory Error detected in
CPU2_DIMM4
An error was detected in
CPU2_DIMM4.
A011 Memory Error detected in
CPU2_DIMM5
An error was detected in
CPU2_DIMM5.
A012 Memory Error detected in
CPU2_DIMM6
An error was detected in
CPU2_DIMM6.
A013 Memory Error detected in
CPU2_DIMM7
An error was detected in
CPU2_DIMM7.
A014 Memory Error detected in
CPU2_DIMM8
An error was detected in
CPU2_DIMM8.
A420
Online Spare Memory was not
ready.
Memory Sparing feature is disabled
in this memory configuration. Confirm the setting for Memory RAS Mode in
SETUP. If Memory Sparing, Memory
Mirroring, or memory LockStep feature is
enabled and DIMM is degraded, this POST
error is displayed.
Run SETUP, change parameter for
Memory
Retest to Yes , and then perform Save
Changes and Exit .
If the same error persists, contact your sales
representative.
A421
Mirroring Memory was not
ready.
Memory Mirroring feature is
disabled in this memory
configuration.
A423
Lockstep was not ready.
Memory LockStep feature is
disabled in this memory
configuration.