NEC EcoPowerGateway N8142-36F, Руководство пользователя

Страница: 51 / 136

General Description 2-13
3.
Connect the EcoPowerGateway with the server unit or Module Enclosure.
The cable connectors have locking mechanism. Make sure that the cable connector is
surely locked.
IMPORTANT:
Incomplete locking of DC cable connector may cause
power leakage, electric shock due to the spark, hardware failure as well
as malfunction of the EcoPowerGateway.
4.
Push the DC output switch to the end.
Make sure that the DC output lamp goes on green.
Module enclosure EcoPowerGateway
K410-213 DC cable
Insert the connector to the
end until it clicks.
To disconnect the connector,
push both sides of the
connector with your fingers
to unlock the connector, as
shown in the figure.
Rear of the EcoPowerGateway
DC output lamp
DC power output ON: Lit green
DC power output OFF: Unlit
DC output switch
The DC output switch is a latch-type
pushbutton switch and equipped on
every four output ports.
DC output ON: Concave
DC output OFF: Convex