NEC EcoPowerGateway N8142-36F, Руководство пользователя

Страница: 49 / 136

General Description 2-11
USING YOUR EcoPowerGateway
This section describes the basic operation of the EcoPowerGateway.
Power-on of EcoPowerGateway
Press the POWER switch on the front side of the EcoPowerGateway and make sure that the
POWER lamp goes on green.
IMPORTANT:
„
The power of the EcoPowerGateway must be turned on after 30
seconds or longer has passed from the previous power-off.
If power-on operation is performed within 30 seconds, you may fail
to power on the EcoPowerGateway. In such a case, make sure that
the power is supplied to the EcoPowerGateway, then press the
POWER switch again to turn on the power.
„
Before the management PC can remotely control the
EcoPowerGateway through the management port, the power of the
EcoPowerGateway must be turned on.
POWER switch POWER lamp