NEC DLP CINEMA NC2500S, Руководство по установке, Страница: 70 / 134

Touch Panel Important Infomation
B-3
CAUTION
• Do not have the liquid crystal panel touched with a sharp-pointed tool
such as a mechanical pencil or a screwdriver. Do not press firmly the
surface of the liquid crystal panel or the frame of the touch panel; they
may be scratched or break down.
• Should the liquid crystal panel be damaged, do not put the internal
liquid into your mouth or touch it. If the liquid gets in your mouth, gargle
at once. If the liquid comes in contact with your skin or it gets in your
eye, first rinse your skin or eye with running water for more than 15
minutes and then see the doctor immediately.
• This machine is designed to monitor and control the projector. Do not
use the machine for other than intended use. Particularly, never use
this machine to make a device which may affect people’s lives (such as
an emergency stop switch).
Disposing of your used product
EU-wide legislation as implemented in each Member
State requires that used electrical and electronic
products carrying the mark (left) must be disposed
of separately from normal household waste.
This includes projectors and their electrical
accessories or lamps. When you dispose of such
products, please follow the guidance of your local
authority and/or ask the shop where you purchased
the product.
After collecting the used products, they are reused
and recycled in a proper way. This effort will help us
reduce the wastes as well as the negative impact to
the human health and the environment at the
minimum level.
The mark on the electrical and electronic products
only applies to the current European Union Member
States.
Fire and Shock Precautions
1. Prevent foreign objects such as paper clips and bits of paper from
falling into your Touch panel. Do not attempt to retrieve any ob-
jects that might fall into your Touch panel. Do not insert any metal
objects such as a wire or screwdriver into your Touch panel. If
something should fall into your Touch panel, disconnect it immedi-
ately and have the object removed by a qualified service personnel.
2. When using a LAN cable:
For safety, do not connect to the connector for peripheral device
wiring that might have excessive Voltage.