NEC DLP CINEMA NC2500S, Руководство по установке, Страница: 50 / 134

A-47
4.
LCD Menu
This chapter describes the menus displayed in the LCD screen on the projector’s control
panel and their functions. For basic operations of menus, refer to the operation manual.
4.1 List of menu
Menus in parentheses are menus for our service personnel. Normally, these menus cannot be
used.
Main menu Submenu Description Ref.
page
"Title Memory name" Selects the title of the signal to be projected. A-49 Title Select
TEST Pattern Selects the test pattern to be projected. A-49
Adjust Adjusts lamp brightness. A-50 Lamp Setup
Feedback Sets the lamp brightness constant mode that
uses a brightness sensor.
Douser Mode Selects whether to use the douser (screen mute)
when switching signals. A-50
Turret Controls the turret mounted with an anamorphic
lens.
Ext. MMS Link Sets whether to connect an external multi-media
switcher (MMS).
Panel Key Lock Locks the buttons on the projector's control panel
so that they cannot be operated.
GPIO Port Selects the target of GPIO port control.
Configuration
(Setup)
FactoryDefault Returns the settings to their default values (only
macro keys and titles, or all settings).
Image Orient Selects the projection method (front/rear). A-52
Lens Center Moves the lens shift position to the center.
MMS Select Selects the multi-media switcher (MMS) to
connect.
Baudrate Sets the PC control connector (RS-232C) data
transmission speed (bps).
Date/Time Sets the date and time on the projector.
(Installation)
New Bulb Resets the lamp bulb usage time and selects or
edits new entries (only when the projector is in
standby mode).