NEC DLP CINEMA NC2500S, Руководство по установке, Страница: 101 / 134

Touch Panel 3. Setting Up Your Projector
B-34
[6] Press the "Import" button
and select a color space file
that corresponds to the input
signal.
Since the required CSC file is already
contained in the projector, you do not
need to enter numerical values.
When you have selected the file, press
the "Exit" button to return to the "PCF
Setting" screen.
Example of selecting a CSC file:
For DVI connector -RGB input: "Unity RGB.CSC" (same as "Mk7 Unity RGB.CSC")
For HD-SDI connector - Component input:10-bit 64-940.CSC"
[7] Press the "Import" button in
"TCGD File" to select the
TCGD file.
In the theater, P7v2 Theater is normally
used. Note that P7v2 telecine should be
used for post production and content
creation.
When you have selected the file, press
the "Exit" button to return to the "PCF
File Setup" screen.
[8] Press the "Import" button in
"LUT-AL File" to select the
LUT-AL file.
(Usually, you do not need to select it.)
When you have selected the file, press
the "Exit" button to return to the "PCF
File Setup" screen.