NEC DLP CINEMA NC2500S, Руководство по установке, Страница: 20 / 134

NC2500S 1. Before Setting Up Your Projector
A-17
1.5.1 Top rear cover removal procedure
[1]
Remove the top front cover
of the projector.
Remove the hexagonal fasteners at the
top (at 4 places) and remove the front
(lens side) cover.
[2]
Open the top rear cover of
the projector and place it
on the top of the projector
once.
Remove the hexagonal fasteners (2
places) on the top.
[3]
Remove the cables for rear
status indicator.
To the top rear cover, the cables from
rear status indicators are connected (2
places). Before removing the cover,
remove the cables as follows:
<1> Remove the cables from the board
(Connector name: POSTA).
<2> Lift up the cover for about 5 cm.
<3> Remove the cables from the clamp
in front of you.
[4]
Remove the top rear cover.
POSTA