NEC DLP CINEMA NC2500S, Руководство по установке, Страница: 69 / 134

Touch Panel Important Infomation
B-2
Precautions
Please read this manual carefully before using your NC-TP6401
Touch panel Controller and keep the manual handy for future
reference.
CAUTION
To turn off main power, be sure to remove the plug
from power outlet.
The power outlet socket should be installed as near
to the equipment as possible, and should be easily
accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABI-
NET.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated volt-
age within the unit may be sufficient to cause elec-
trical shock. Therefore, it is dangerous to make any
kind of contact with any part inside of the unit.
This symbol alerts the user that important informa-
tion concerning the operation and maintenance of
this unit has been provided. The information should
be read carefully to avoid problems.
WARNING
TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EX-
TENSION CORD OR IN AN OUTLET UNLESS ALL THREE
PRONGS CAN BE FULLY INSERTED.
DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE
COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY
QUALIFIED SERVICE PERSONNEL.
DOC Compliance Notice
This Class A digital apparatus meets all requirements of the Ca-
nadian Interference-Causing Equipment Regulations.
3. GSGV Acoustic Noise Information Ordinance:
The sound pressure level is less than 70 dB (A) according to ISO
3744 or ISO 7779.
In UK, a BS approved power cable with moulded plug has a Black
(five Amps) fuse installed for use with this equipment. If a power
cable is not supplied with this equipment please contact your
supplier.
• DLP TM (Digital Light Processing TM ), DLP Cinema TM are trademarks of
Texas Instruments.
• IBM is a registered trademark of International Business Machines Cor-
poration.
• Other product and company names mentioned in this user's manual
may be the trademarks of their respective holders.
RF Interference
WARNING
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
CAUTION
• In order to reduce any interference with radio and television recep-
tion use a signal cable with ferrite core attached.
Use of signal cables without a ferrite core attached may cause
interference with radio and television reception.
• This equipment has been tested and found to comply with the lim-
its for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the installation manual, may cause harmful in-
terference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to cor-
rect the interference at his own expense.
Important Safeguards
These safety instructions are to ensure the long life of your Touch
panel Controller and to prevent fire and shock. Please read them
carefully and heed all warnings.
Installation
1. Do not place your Touch panel in direct sunlight, near heaters or
heat radiating appliances.
2. Exposure to direct sunlight, smoke or steam can harm internal com-
ponents.
3. Handle your Touch panel carefully. Dropping or jarring can dam-
age internal components.
4. Do not place heavy objects on top of your Touch panel.
Power Supply
1. The Touch panel is designed to operate on a power supply of 19V
DC. Ensure that your power supply fits this requirement before
attempting to use your Touch panel.
2. Handle the power cable carefully and avoid excessive bending. A
damaged cord can cause electric shock or fire.
3. If the Touch panel is not to be used for an extended period of
time, disconnect the plug from the power outlet.
4. Do not touch the power plug with wet hand. Doing so can cause
electrical shock or fire.
5. Do not touch the power plug during a thunder storm. Doing so
can cause electrical shock or fire.
Cleaning
1. Before cleaning the touch panel controller, turn off the power.
2. Wipe it with a soft lint-free cloth. In doing so, do not strain the liquid
crystal panel; it may cause a damage.
3. When the panel is badly stained, soak a cloth in neutral detergent deluted
with water, wring it out, and wipe the stain off. As a finishing touch, wipe
the panel with a dry cloth.
When using a chemical dustcloth, follow its instructions.