NEC DLP CINEMA NC1600C, Руководство по обслуживанию

Страница: 65 / 382

Important Information
Precautions
Please read this manual carefully before using your NC-
TP6402/NC-TP6401 Touch Panel Controller and keep the
manual handy for future reference.
Your serial number is located on the rear of your NC-TP6402/
NC-TP6401 Touch Panel Controller. Record it here:
CAUTION
To turn off main power, be sure to remove the
plug from power outlet.
The power outlet socket should be installed
as near to the equipment as possible, and
should be easily accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE
CABINET.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol warns the user that uninsulated
voltage within the unit may be sufficient to
cause electrical shock. Therefore, it is danger-
ous to make any kind of contact with any part
inside of the unit.
This symbol alerts the user that important in-
formation concerning the operation and
maintenance of this unit has been provided.
The information should be read carefully to
avoid problems.
WARNING
TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN
EXTENSION CORD OR IN AN OUTLET UNLESS ALL
THREE PRONGS CAN BE FULLY INSERTED.
DO NOT OPEN THE CABINET. THERE ARE HIGH-
VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST
BE DONE BY QUALIFIED SERVICE PERSONNEL.
DOC Compliance Notice for Europe
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Machine Noise Information Regulation - 3. GPSGV,
The highest sound pressure level is less than 70 dB (A) in
accordance with EN ISO 7779.
AC power cable (NC-TH6403 accessory) for UK
In UK, a BS approved power cable with moulded plug has a
Black (five Amps) fuse installed for use with this equipment.
If a power cable is not supplied with this equipment please
contact your supplier.
• Windows is registered trademarks or trademarks of
Microsoft Corporation in the U.S. and/or other countries.
• Other product and company names mentioned in this
user's manual may be the trademarks of their respective
holders.
NC-TP6402
RF Interference (for USA only)
WARNING
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
CAUTION
• In order to reduce any interference with radio and
television reception use a signal cable with ferrite core
attached. Use of signal cables without a ferrite core
attached may cause interference with radio and television
reception.
• This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the installation manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
NC-TP6401
RF Interference (for USA only)
WARNING
The Federal Communications Commission does not allow
any modifications or changes to the unit EXCEPT those
specified by NEC Corporation of America in this manual.
Failure to comply with this government regulation could void
your right to operate this equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician
for help.
Important Safeguards
These safety instructions are to ensure the long life of your Touch
Panel Controller and to prevent fire and shock. Please read them
carefully and heed all warnings.
E-1