![background image](http://html.mh-extra.com/html/nec/direction-l-service/direction-l-service_manual_248502124.webp)
6-2 Setting System Board Jumpers
The following table summarizes the system board jumper
settings.
System Board Jumper Settings
FUNCTION
JUMPER J8B2
CONFIGURATION
Normal
1-2
The BIOS uses current
configuration information and
passwords for booting.
Configure
2-3
After POST, Setup runs
automatically. The
Maintenance menu appears.
Recovery
None
BIOS attempts to recover the
BIOS configuration. A recovery
diskette is required.
CLEARING YOUR PASSWORD
The following sections describe how to clear your
password.
1.
Turn off the power and unplug the system and any
peripherals.
!
WARNING
Turn off the system before you change any jumper
settings.
2.
Remove the access cover (see “Removing the Access
Cover” in Chapter 5).
3.
Locate the Configuration jumper (J8B2) on the system
board (see “Locating the Jumper” in the previous
subsection).