manualshive.com logo in svg

NEC DIRECTION L - SERVICE, Руководство пользователя, Страница: 191 / 199

Поделиться
Скачать
NEC DIRECTION L - SERVICE Скачать руководство пользователя страница 191

    

 D-10   System Board, Connectors, and Error Messages

 Message

 Real time clock error.

 Cause

 The real time clock failed BIOS test.

 Solution

 This malfunction may require board repair.

 

 

 Message

 Shadow RAM failed at offset: 

nnnn.

 Cause

 Shadow RAM failed at offset: 

nnnn of the 64K

block at which the error was detected.

 

 

 Message

 System cache error – Cache disabled.

 Cause

 RAM cache failed the BIOS test. BIOS
disabled the cache.

 

 

 Message

 System RAM failed at offset: 

nnnn.

 Cause

 System RAM failed at offset: 

nnnn of the 64K

block at which the error was detected.

 

 

 Message

 System timer error.

 Cause

 The timer test failed.

 Solution

 This malfunction requires repair of system
board.

 

 

 

 

 

 

 

 

Содержание DIRECTION L - SERVICE








































































































































































































Отзывы:

Нет отзывов