manualshive.com logo in svg

NEC DIRECTION L - SERVICE, Руководство пользователя, Страница: 93 / 199

Поделиться
Скачать
NEC DIRECTION L - SERVICE Скачать руководство пользователя страница 93

    

 4-16   System BIOS and Utilities

„

Key Click

 This feature enables or disables the key click option.
Select “Enabled” or “Disabled” (default).

„

Keyboard Auto-Repeat Rate

 This feature selects the key repeat rate, the rate at which
a key, when pressed and held, repeats itself. The eight
options range from 30 per second (default) to 2 per
second.

„

Keyboard Auto-Repeat Delay

 This feature selects the delay before key repeats. The
four options include from ¼ second to 1 second. The
default is ½ second.

 To return to the Advanced Menu, press the 

Esc

 key.

Video Configuration Submenu

 This submenu can be used to configure specific video
features. To enter the submenu, highlight the field, then
press the 

Enter

 key on your keyboard. The following option

appears:

„

Palette Snooping

 This option controls the ability of a primary PCI
graphics controller to share a common palette with an
ISA add-in video board. Select “Enabled” or “Disabled”
(default).

 To return to the Advanced Menu, press the 

Esc

 key.

DMI Event Logging Submenu

 This submenu can be used to view and modify DMI Event
Logs. To enter the submenu, highlight the DMI Event
Logging field, then press the 

Enter

 key on your keyboard.

The following options appear:

Содержание DIRECTION L - SERVICE








































































































































































































Отзывы:

Нет отзывов