NEC DIRECTION L - SERVICE Скачать руководство пользователя страница 126

Страница: 126 / 199

6-4 Setting System Board Jumpers

RECOVERING THE BIOS

The following sections describe how to recover the system
BIOS.

Turn off the power and unplug the system and any
peripherals.

WARNING

Turn off the system before you change any jumper
settings.

Remove the access cover (see “Removing the Access
Cover” in Chapter 5).

Locate the Configuration jumper (J8B2) on the system
board (see “Locating the Jumper” in the previous
subsection).

You may have to remove any installed expansion boards
to access the jumper (see “Removing an Expansion
Board” in Chapter 5).

Remove the jumper block from pins 1-2. We recommend
that you use needle nose pliers to move a jumper.

Replace the access cover (see “Replacing the Access
Cover” in Chapter 5).

Connect system power cables and monitor.

Power on the system.

The system attempts to recover the BIOS. A recovery
diskette is needed.

Power off, unplug the system and monitor, and remove
the access cover.

Содержание DIRECTION L - SERVICE








































































































































































































Результаты поиска

Содержание DIRECTION L - SERVICE

Отзывы:

NEC DIRECTION L - SERVICE, Руководство пользователя, Страница: 126 / 199

Результаты поиска

Содержание DIRECTION L - SERVICE

Отзывы: