manualshive.com logo in svg

NEC DIRECTION L - SERVICE, Руководство пользователя, Страница: 103 / 199

Поделиться
Скачать
NEC DIRECTION L - SERVICE Скачать руководство пользователя страница 103

    

 4-26   System BIOS and Utilities

„

Load Setup Defaults

 This option loads the Setup program’s default values.

„

Load Custom Defaults

 This option loads Custom default settings.

„

Save Custom Defaults

 This option saves your changes to Custom default
settings.

„

Discard Changes

 This option loads previous values from CMOS RAM for
all BIOS settings.

 

NOTE

If your system’s CMOS fails, the BIOS will

load custom default settings (if you’ve saved them)
or factory default settings.

 Finally, press the Enter key again to confirm and exit the
Setup program.

BIOS FLASH UTILITY

 From time to time, changes are made to a computer
system’s BIOS. While not essential, it is usually beneficial
to upgrade if there is a new BIOS for your system. Check
the NECCSD Bulletin Board Service (BBS) for information
regarding an update to your system’s BIOS. If there is one
available, the BBS will have both the BIOS itself and
instructions for downloading it.

 Update the BIOS from the BIOS flash diskette as follows.

Содержание DIRECTION L - SERVICE








































































































































































































Отзывы:

Нет отзывов