manualshive.com logo in svg

NEC DIRECTION L - SERVICE, Руководство пользователя, Страница: 190 / 199

Поделиться
Скачать
NEC DIRECTION L - SERVICE Скачать руководство пользователя страница 190

    

 System Board, Connectors, and Error Messages   D-9

 Message

 Operating System not found.

 Cause

 The operating system cannot be found in either
Drive A or Drive C.

 Solution

 Run the Setup program and make sure the
fixed disk and drive A are properly identified.

 

 

 Message

 Press <F1> to resume, <F2> to enter SETUP.

 Cause

 Displayed after any recoverable error
message.

 Solution

 Press the <F1> key on your keyboard to start
the boot process, or <F2> to enter the Setup
Utility program and change any settings.

 

 

 Message

 Press <F2> to enter SETUP.

 Cause

 Optional message displayed during POST.
Can be turned off in the Setup program.

 Solution

 Run the Setup program and disable the
feature.

 

 

 Message

 Parity Check 1.

 Cause

 Parity error found in the system bus. BIOS
attempts to locate the address and display it
on the screen. If it cannot locate the address, it
displays 

????.

 

 

 Message

 Parity Check 2.

 Cause

 Parity error found in the I/O bus. BIOS
attempts to locate the address and display it
on the screen. If it cannot locate the address, it
displays 

????.

 

 

 

 

 

 

Содержание DIRECTION L - SERVICE








































































































































































































Отзывы:

Нет отзывов