English-14
Iperating Range for the Remote
Control
Point the top of the remote control toward the monitor’s
remote control sensor during button operation.
Use the remote control within a distance of about 7 m (23 ft.)
from the remote control sensor, or at a horizontal and
vertical angle of within 30° and within a distance of about
3.5 m (10 ft.).
IMCGE FLIP Button
Toggle switches between [H FLIP], [V FLIP], [180° ROTATE]
and [NONE]. See
CCUIVE PICUURE Button
Selects active picture.
MULUI PICUURE Button
IO/IFF ButtonN:
Toggle switches between ON and OFF.
MIDE ButtonN:
Selects a mode from PIP (picture in picture)
or PBP (picture by picture).
CHCOGE ButtonN:
Swaps images between two pictures.
PICUURE CSPECU ButtonN:
Selects active picture frame
aspect.
OIUEN:
Enable to change each multi picture size by pressing
SET/POINT ZOOM button during multi picture mode.
REMIUE ID Button
Activates the REMOTE ID function. See
MUS Button*
1
*1: This button’s action depends on which Option Board you are using.
Refer to the Option Board’s user’s manual for further information.
OIUEN:
The buttons with no explanation do not function.
CautionN:
The remote control system
may not function when direct
sunlight or strong illumination
strikes the remote control
sensor, or when there is
an object in the path.
Handling the remote control
• Do not expose to strong shock.
• Do not allow water or other liquid to
splash on the remote control. If the
remote control gets wet, wipe it dry
immediately.
• Avoid exposure to heat and steam.
• Except to install the batteries, do not open the remote
control.
