background image

English-24

Connect compatible USB storage device

Format a USB memory in the FAT32 format or FAT16 format to use it with the Media Player. Refer to the computer’s instruction 
user’s manual or Help file on how to format a USB storage device.

Please use a USB storage device with this monitor in accordance with the drawing below.
If the physical size of the USB storage device is larger than the supported sizes listed below, please use a USB extension cable.

USB memory

Extension cable

Under 7.8 mm

OIUEN:

 

If the monitor does not recognize a connected USB storage device, make sure the file structure is FAT32 or FAT16.
It is not guaranteed to work with all USB memories sold commercially.
Please connect the USB memory to USB MP (See 

page 19

).

File display screen

The files can be displayed using either icons or thumbnails in the Media Player.

Icon display

RETURN

Goes back one level higher.

PAGE UP

Displays a list of the previous files.

PAGE DOWN

Displays a list of the next files.

SETTINGS

Displays the setting screen.

THUMBNAILS/ICON

Switches between thumbnail display and icon display.

SORT

Changes the order to display files by name (filename), type (file extension), date (date of creation), or size 
(file capacity). The default sorting order is by “Name”.

EJECT

Disconnects from the USB storage device or the microSD memory card inserted to the monitor. Please 
select EJECT when file list is displayed.

OIUEN:

 

The maximum number of files that can be displayed in a folder including folder icons is 300.
A folder hierarchy is shown up to level 16.
The icon of a file whose type cannot be determined is indicated by a “?”.
Depending on the file, thumbnail cannot be displayed.

Содержание C751Q

















































































Отзывы: