NEC 1260 - SuperScript - Printer, Руководство пользователя

Страница: 14 / 168

1-8 NEC SuperScript 1260 User’s Guide
Chapter 1: Setting Up the Printer
System Requirements
The SuperScript 1260 printer works with MS-DOS
3.3 or higher, Windows 3.1 (in
Enhanced Mode) ,
Windows 95, or Windows for WorkGroups.
To run SuperScript 1260 Windows software, you
will need an IBM-compatible PC with at least a
386SX 16-MHz CPU. This includes all 486-based
and most 386-based PCs. To verify if your PC can
run in
Enhanced Mode , type WIN/3 at the MS-DOS
prompt. If your PC cannot run Windows in
Enhanced Mode , the system will tell you.
The SuperScript 1260 printer can also be run
directly from DOS. The printer will automatically
invoice PCL emulation mode to process DOS jobs.
A standard PC parallel printer port is required to
connect with the SuperScript 1260 printer through
a high quality parallel cable (see “FastFacts” in
Chapter 10).
Because of the SuperScript 1260’s high speed
interface, it is important to use a properly
manufactured parallel cable. Use of a poor quality
parallel cable may affect your output.
Software Requirements
To use the SuperScript 1260 Windows software,
you will need:
• A 386 or better personal computer
• A 1.44 MB 3.5-inch floppy disk drive
• At least 4 MB (6 MB recommended) of RAM
for use with Windows 3.1 or 3.11
• At least 8 MB of RAM for use with
Windows 95
• Microsoft Windows 3.1, 3.11, or 95
To use the SuperScript 1260 Solutions CD, in
addition to the requirements listed above, you
will need:
• A CD-ROM drive (486 personal computer
recommended)
• Additional RAM, if needed for CD operation
To use the SuperScript 1260 DOS software, you
will need:
• A 286 or better personal computer
• A 1.44 MB 3.5-inch floppy drive
• At least 640 K of RAM
• DOS 3.3 or later
After you have removed the printer from the
shipping box, complete the following instructions