NEC 1260 - SuperScript - Printer, Руководство пользователя

Страница: 153 / 168

Laser Safety
B-3
advisable to position the printer away from the
sensitive user.
Laser Safety
This printer is certified as a Class 1 laser product
under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance
Standard according to the Radiation Control for
Health and Safe Act of 1968. This means that the
printer does not produce hazardous laser
radiation.
Since radiation emitted inside the printer is
completely confined within protective housings
and external covers, the laser beam cannot escape
from the machine during any phase of user
operation.
CDRH Regulations
The Center of Devices and Radiological Health
(CDRH) of the U.S. Food and Drug Administra-
tion implemented regulations for laser products
on August 2, 1976. These regulations apply to
laser products manufactured from August 1, 1976.
Compliance is mandatory for products marketed
in the United States. The printer’s rear panel
indicates compliance with the CDRH regulations
and must be attached to laser products marketed
in the United States.
Caution! Use of controls, adjustments, or
performance of procedures other than
those specified in this manual, may result
in hazardous radiation exposure.
FCC Statement
(For United States Use Only)
Federal Communications Commission
Radio Frequency Interference Statement
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a resi-
dential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to