NDC BETA LaserMike LaserSpeed Pro 8500-4, Инструкция по эксплуатации, Страница: 277 / 348

LaserSpeed Pro 8500-4 Instruction Handbook:
Profibus DP™
11-11
ID Parameter Type R/W Description
1 TW Long RW Analog Calibration
2 D Long RW Analog Full Scale Value
3 N Long RW Analog Zero Scale
4 TA Long RO APD Bias Setting
5 *AUTO232 Long RW Auto-232 startup mode
6 *AUTO422 Long RW Auto-422 startup mode
7 *AUTOUDP Long RW Auto-UDP startup mode
8 *AUTOADDR Long RW Auto-UDP target IP address
9 *AUTOPORT Long RW Auto-UDP target port number
10 # Long RW Auxiliary digital output mode
11 J Long RW Startup baud rate RS232
12 @ Long RW Startup baud rate RS422
13 C Long RW Calibration Trim
14 $C Long RO COM LED
15 TU Long RW DDS Shift Frequency
16 TO Long RW Delta-L calculation mode
17 TC Long RO Calibration number
18 *DHCP Long RW DHCP Enable
19 K Long RW DIP Averaging
20 A Long RW Direction
21 $D Long RO Last High Speed Pulse Count
22 $H Long RW High Speed Pulse Output Mode
23 L Long RW High Speed Pulse Rate
24 *IPADDR Long RW Ethernet IP Address
25 *IPDEFGW Long RW Ethernet Default Gateway Address
26 *IPNETMSK Long RW Ethernet IP Netmask
27 TL Long RO Laser Diode Temperature Setting
28 TD Long RO Laser Diode Current Setting
29 :L Long RW Part Length Lower Tolerance Offset
30 :N Long RW Part Length Nominal Length