NDC BETA LaserMike LaserSpeed Pro 8500-4, Инструкция по эксплуатации, Страница: 206 / 348

6-52 LaserSpeed Pro 8500-4 Instruction Handbook: RS-232/RS-422 Communication
Value
Pulse Output Function
Phase A Phase B
0 Default (High Speed Pulse Outputs)
1 System Ready Material Present
2 System Ready Valid
3 System Ready QF Pulse Output
4
System Ready QF Warning Out-
put
5 System Ready Shutter Open
6 System Ready Laser On
7
System Ready Thermostat Out-
put
8
Valid Thermostat Out-
put
9
Light Stack (Yel-
low) Light Stack (Red)
10
Pulse Phase A Length Threshold
B
11
Length Threshold
A Length Threshold
B
Note: Some of the above outputs were previously described under the
Index Pulse Output Func-
tion
setting.
Light Stack (Yellow)
This output can be used to drive a solid-state relay to turn on the yellow light in a light stack. The
yellow light is illuminated when the LS8500-4 laser is turned on, but the beam shutter is closed,
indicating that the LS8500-4 is not emitting laser radiation. See the
Light Stack Interface
section
for details.
Voltage High: Yellow lamp should be illuminated
Voltage Low: Yellow lamp should
not
be illuminated