NCR P1235 e*SmartClock Installation Guide, Ver. 1.1
US-IT Restaurant Architecture Team
Page 13 of 37 12/6/16
7.3
Installation of Receipt Printer
Installation of a printer is optional. Check that all the Printer-related contents have been included for installation.
e*SmartClock printer solution contents EPSON TM-L90P USB/Parallel printer, printer power cable with brick, and
Printer Bracket. The NCR P1235 does not support a Powered USB printer.
Step
Step Description
Pictures
1
Locate the Printer Bracket; determine
mounting location.
•
Leave enough room to allow the printer
to be opened to change paper.
•
Do not mount unit over a heat or
moisture source.
•
The adjustable bumpers may be
removed.
Note
: The newer printer bracket will not
have bumpers.
2
If mounting into a wooden stud or plywood
backing:
•
Locate ¼ x 3 inch screws.
•
Drill screw holes using a ½ inch drill bit.
If not mounting into a solid backing:
•
Locate Toggle Bolt and ¼ x 2.5 inch
Phillips head screw.
•
Drill screw hole and insert Toggle Bolt.
3
Secure the bracket on the wall and turn the
screws tightly to lock the bracket in.
The top hole/slot is for adjusting the angle of
the printer.
Use thumb knobs to tighten, if available
4
Remove the plastic cover on the bottom of
the printer.
