Model 7600 Family PWC User’s Manual
26
The re-calibration RE-CAL mode menu lets you
change the scale resolution, rounding method,
units and range or interval method without using
any calibration weights.
For a scale originally calibrated in the lb mode,
you may also change rounding methods (i.e.
scale or classifier).
Follow these steps to re-configure your scale
(without weights). Refer to Figure 2.
1. From the normal weighing mode, move
Switch 1 to the Menu mode or Open posi-
tion…
DIAG
is displayed.
2. Press the
ZERO
key until…
RE-CAL
is displayed.
3. Press the
UNITS
key…
ROUND
is displayed.
To change the weight rounding method,
press the
UNITS
key. The current
rounding method is displayed.
4. Press the
ZERO
key to toggle between
SCALE
and
CLASS
.
5. When the choice you want is displayed,
press the
UNITS
key.
6. To change the capacity/resolution, press the
ZERO
key until
RESO
is displayed.
Re-Calibration
Can’t
will be displayed
if originally calibrated
for a non-switching
capacity/resolution.
Re-Calibration
(RE-CAL) Mode
Step-by-Step
Instructions
for RE-CAL mode
