Ready To Burn
Ready To Burn: Version 1.0 October 2015
Page
2
of
24
SAFETY FIRST
Never handle the auger, blower, nor crawl on the hopper when the system is
powered. There will be no warning prior to the activation of these components.
The boiler must not be operated without the shield on the burner.
The system is provided with an electrical current of 230V/50Hz. An improper
installation or improper repair can cause life-threatening electrical shock.
Electrical connections must be performed by the person who has the right skills
and training. Performance of electrical installation must be carried out in
COMPLIANCE with the relevant rules. Always disconnect the system from the electrical
supply prior to starting maintenance work or servicing. The system must be connected to a
separate electrical circuit, which is equipped with the proper circuit breaker and earth
leakage breaker.
The boiler must be mounted to a functioning chimney. In the event that you
smell smoke or see any other indication of improper draft of the chimney, all
operation of your system must cease immediately and must remain so until a
solution to the draft problem has been resolved. Continuing operation may
result in death or injury.
Always read the manual before installing and/or repairing of the system. If in
doubt, seek professional help.
Open top covers etc with extreme caution, there is a risk of high temperature
below the top covers which can cause burns. Avoid handling the boiler while it
is in operation. Never open the covers or ash tray while the boiler is in
operation.
The system must only be installed and commissioned by qualified installers. If
you are in doubt as to the safe operational use of the boiler, contact your
dealer.
The menu structure for the controller is supported by help texts found within each section of
the control box itself. Due to constant updates and new features, the menu structure of the
controller will not be described here in this manual. If in doubt, never alter the settings of
the boiler without consulting your installer. Incorrect settings will compromise the efficiency
of the boiler and could affect any warranty cover.
Your installer should give you a full hand over of the system and an overview of all functions
etc.
This manual must be kept with the boiler!
