54
NH 2001M
NBase Communications
set-br-prio
Usage:
set-br-prio <
priority>
This command sets the Spanning Tree bridge priority of the Switch.
priority
is an integer in the range 0..65535. This is equivalent to setting the MIB vari-
able dot1dStpPriority (RFC 1286).
set-br-maxage
Usage:
set-br-maxage <maxage>
This command sets the Spanning Tree bridge MaxAge. This is the amount of
time between Spanning Tree configuration messages. Note that
maxage
is in
units of seconds in the range 6..40, while the corresponding MIB variable,
dot1dStpBridgeMaxAge (RFC 1286), is in units of hundreths of a second, in
the range 600..4000, and must be a multiple of 100.
set-br-hellot
Usage:
set-br-hellot <
hello_time>
This command sets the Spanning Tree bridge Hello Time.
hello_time
is an
integer in the range 1..10. Note that
hello_time
is in units of seconds, while
the corresponding MIB variable, dot1dStpBridgeHelloTime (RFC 1286), is in
units of hundreths of seconds in the range 100..1000, and must be a multiple
of 100.
set-br-fwdel
Usage:
set-br-fwdel <
forward_delay>
This command sets the Spanning Tree bridge Forward Delay. This controls
the amount of time between the listening and forwarding Spanning Tree states,
and is completely unrelated to the forwarding latency. Note that
forward_delay
is an integer in units of seconds in the range 4..30, while the
corresponding MIB variable, dot1dStpBridgeForwardDelay (RFC 1286), is in
units of hundreths of seconds in the range 400..3000, and must be a multiple
of 100.
AI2001SB.QXD 4/5/98 11:27 AM Page 54