SD /M MC
MS
U SB
AV OU T
P H ON E
OFF
ON
POW ER
IN PU T 9 -1 2V -- -
RF IN
25
8
TV OPERATIONS
TURN ON THE UNIT
1. Push POWER switch at the right side of the unit to turn on the unit.
2. Press SWITCH button to set the unit in TV mode.
ANTENNA OPERATION
EXTERNAL ANTENNA
Install external antenna into antenna jack for best reception.
BASIC CONNECTION
Connecting to AC power source
NOTE:
Before connecting to AC power, push the
POWER ON/OFF switch to OFF.
AC adaptor
To power outlet
Main unit
Ensure all the cables are disconnected from the main unit before connecting to AC power
source .
Read through the instructions before connecting other equipment.
Rechargeable Battery Use
The player built-in a chargeable Lithium battery.
1.Charge the battery
-Connect the adaptor to the DC 12V IN jack, then set the unit in POWER ON mode (THE
PLAYING MODE)for fully charge.
-Set in POWER ON mode and press the STANDBY button (THE STANDBY MODE) or
set in POWER OFF mode for fully charge.
And the indicator is red during charging; it gets green when charging is completed.
2.Time to recharge the battery
Charge the built-in battery pack 8 hours before using the player for the first time.
Recharge and playback time depends on battery pack capacity and the temperature condition.
Generally speaking, The battery needs to be charged about 4 hours.
3.Using and Maintaining Rechargeable Battery
O
-.The normal working condition temperature is: 0 ~45 C ;
-.Always unplug AC/DC power supply for the unit whenever not playing.
NOTE: A new battery pack which has not been used or one which has not been used for more
than a month, may appear to not recharged enough , this is due to the characteristic of this
battery and is not a malfunction. In this case, recharge it two or three times before the first use
，
and it needs more than 8 hours to recharge battery.
Noises may be generated during recharging. In this case, use a more distant power socket.
Do not recharge or discharge battery near a heating element such as a heater or direct sunlight.
BASIC OPERATIONS
1. Press CH + button to enter next channel.
2. Press CH - button to enter previous channel.
3. Press numeric but tons on the remote control directly to select program what you want.
Example: Track 9, press "9" three seconds later, it will automatically switch to track 9,
or press ENTER button to confirm directly.
Track 12,press "1 " and "2", three seconds later, it will automatically switch to track12,or press
ENTER button to confirm directly.
Note: If one frequence dot has more than one channel, for example, you want select
<CH 14 NO.2>, Press 1 and 4, then press right navigation button and input 2.Press ENTER
button to confirm. Once the input is done, it will start broadcasting the selected channel
immediately.
SELECT WANTED PROGRAM
AUTO SEARCHING
Before normal watching you must search effective channels first.
-Press MENU button on remote control, the screen will display:
-Select AUTO SEARCH item, press right button to enter this item.
-Set the SOURCE TYPE what you want. Select START SEARCH item then press right to start
to search channels automatically. Wait for several minutes until searching finished, then the
first searched channel will be played.
NOTE:
You must do auto search again after different system selection according to your area.
:Up/Down
ME NU:G o Bac k
:Select
Main Menu
Auto Search
CH Setup
CC Setup
EAS Setup
Program Control
System Setup
External antenna jack
MUTE CONTROL
Press the MUTE button to mute the sound, press it again to switch ON the sound.
NOTE:
When the unit is in Mute mode, pressing VOL+ button will switch ON the sound and turn
it up, pressing VOL- button will switch ON the sound and turn it down.
VOLUME CONTROL
1. Press the VOL+ or VOL- to adjust the level of currently volume.
2.The level of VOLUME can be adjust from 0-40.
