25
iCN 600 series
|
User Manual
15. Settings
You can modify the following settings to suit your preferences.
Screen Brightness
1. Press and hold the
Zoom/Brightness
button to display the brightness indicator bar.
2. Press + or - on the
Zoom/Brightness
button to adjust the brightness. The iCN can heat up when display
brightness is set at over 70%. Use low screen brightness when possible.
Volume
1. Press and hold the
Volume
button to display the Volume bar.
2. Press + or - on the
Volume
button to adjust the volume.
Route Settings
1. From the
Main Menu
, select the
Settings
option.
2. From the
Settings
screen, select the
Routes
option. The
Routing
screen will display.
3. Move the
Route Type
slider towards
Shortest
to give more weighting
to the shortest distance when calculating a route; Move the
Route
Type
slider towards
Quickest
to give more weighting to the fastest
time when calculating a route.
4. Move the
Preference for Freeways
slider towards
Use Less
to use
freeways less often when calculating a route; Move the
Preference
for Freeways
slider towards
Use More
to use freeways more often
when calculating a route.
5. Move the
Preference for Urban Roads
slider towards
Use Less
to
use urban roads often when calculating a route; Move the
Preference
for Urban Roads
slider towards
Use More
to use urban roads more
often when calculating a route.
6. Press the
Page
button.
7. Select the
Avoid Toll Roads
,
Avoid Unsealed Roads
and
Avoid Ferries
check boxes to avoid these areas
when your route is calculated.
8. Select the
Warn when using Toll Roads
,
Warn when using Unsurfaced Roads
and
Warn when using
Ferries
check boxes to display a warning message at the start of your trip if your route will include these areas
9. To enable Back on Track™ automatic rerouting, select the
Automatic Rerouting
check box . Automatic
rerouting will update the calculated route if you take a wrong turn.
10. Press the
Page
button.
11. To enable the Route Demonstrator, allowing you to plan and view a route
without a GPS fix, select the
Demonstrate Route
check box.
12. To enable the route demonstrator to be repeatedly played, select the
Repeat
check box.
13. To enable the Smart
demonstration to be played, select the
Smart
Demonstration
check box.
The demonstration will navigate between the first and second Favorite after a ten second delay.
14. To enable GPS datalogging, select
Track Recording
. The
Data Logging Enabled
screen will display.
Note: A memory card is required for datalogging.
• Select the
Name of log file
box and press
OK
. The
Enter Text
screen will display.
