Version 18.02.2022
HW:CAM(V100)/(V47)
RL4-MBMC
P
a
g
e
16
2.6.
After-market front camera
The red power supply output
ACC/front cam out 12V (max 3A)
can be used to power a front
camera. If Dip 1 is set to ON (of the black 8 dips), the power supply output su12V
(max 3A) when the reverse gear is engaged and additionally
10 seconds delay after reverse gear is disengaged.
Note:
In addition, a manual switch-over to the front camera input is possible via keypad
(short press) from any image mode. The power supply output su12V then, too (if Dip
1 is set to ON and the front camera input is selected).
Connect the rear-view camera power cable to the red wire
"ACC/front cam out +12V
(max 3 A)"
of the 12-pin interface cable.
Connect the negative cable of the front camera to the vehicle
’s negative Ground
ground.
