Version 18.02.2022
HW:CAM(V100)/(V47)
RL4-MBMC
P
a
g
e
14
2.4.3.1
Connection
–
switching input by 12pin Power cable (with analogue connection
without CAN-Bus)
Connect the enclosed 12pin interface cable’s female 12pin connector to the male
12pin connector of the video interface.
Connect the purple coloured wire
„
Manual ACC Input +12V - +24V
of the 12pin
interface cable to
S-contact terminal 86s
e.g. glove compartment illumination
(
Connection to ACC Accessory power not sufficient)
.
Note:
Only as long as the video interface is switched on via +12V by the 10pin connector of
the 31pin PNP cable and via +12V - +24V by the purple wire
„
Manual ACC Input +12V
-
+24V“
of the 12pin interface cable, the MBUX screen is also switched on.
Otherwise, the factory picture is black.
When selecting the switch signal, please check whether the factory picture is
available in all desired operating states.
