International LT625
COMPANY CONFIDENTIAL
© 2019 SmartDrive Systems, Inc. This information is intended for use by SmartDrive customers only. Any other use without the express written consent of SmartDrive Systems, Inc. is strictly prohibited.
Rev 5, August 04, 2020
Connection instructions
Analog 1: 360 camera mounted on the passenger-side
Analog 2: 360 camera mounted on the driver-side
Analog 3: Any other analog camera (backup, rear view, etc.)
Analog 4: Not available
Details
Connect all cables to their ports and route through the strain relief
channel. Use mounting tray for securing the Controller
Please take extra care when routing and tying up the camera
cables as kinks or tight cable ties may create video failure
Depress the SMB coaxial connector until it clicks (locks) in place
then route the cable in the strain relief channel
Should you need to remove a cable, use the cable removal tool
Controller Connections: Analog cameras
Analog Camera 4
Cable Puller
Analog Camera 3
Analog Camera 2
Analog Camera 1
