International LT625
COMPANY CONFIDENTIAL
© 2019 SmartDrive Systems, Inc. This information is intended for use by SmartDrive customers only. Any other use without the express written consent of SmartDrive Systems, Inc. is strictly prohibited.
Rev 5, August 04, 2020
Connection instructions
1.
Forward-facing Camera (FWDCAM-1 port)
2.
Cab-facing Camera (DCAM-2 port)
3.
Reserved (DCAM-3 port)
4.
Other Digital Camera (DCAM-4 port) (not available)
5.
Cellular Antenna (CELL ANT port)
6.
WIFI Antenna (WIFI ANT port)
Details
Connect all cables to their ports and route through the strain relief
channel. Use mounting tray for securing the Controller
Please take extra care when routing and tying up the camera
cables as kinks or tight cable ties may create video failure
Depress the SMB coaxial connector until it clicks (locks) in place
then route the cable in the strain relief channel
Should you need to remove a cable, use the cable puller
Cellular Antenna
WIFI Antenna
Cable Puller
Forward-facing camera
Cab-facing camera
Reserved
Other Digital Camera
Controller Connections: Forward and Cab-facing cameras and Sensor Bar (Cellular and WIFI)