International LT625
COMPANY CONFIDENTIAL
© 2019 SmartDrive Systems, Inc. This information is intended for use by SmartDrive customers only. Any other use without the express written consent of SmartDrive Systems, Inc. is strictly prohibited.
Rev 5, August 04, 2020
During an install, you may find obstructions such as sun
visors and third party devices that make it impossible to
mount in a SmartDrive approved location. The following
describes our recommended adjustments in these
situations.
Sun Visors are set in the down position and fully
extended during the install process to verify the Cab-
facing camera has a clear view of the drivers face, hands
on the steering wheel, shoulder, and seat or lap belt.
When blocked by visor, mount the Cab-facing camera
using the secondary location where the desired view is
attainable.
When third party devices are located at the top center of
the windshield, mount the forward-facing camera on the
right side of the device.
Third-party devices
Best Practice: Camera Mounting Considerations
Obstruction Zone
