Navigon MobileNavigator 5, Руководство пользователя

Страница: 88 / 108

User's manual MobileNavigator | 5
- 86 - Adding a stage point during navigation
Survey In MobileNavigator the following functions are available in
navigation mode:
Ù
Adding a stage point during navigation, see below
Ù
Skipping the next stage point, see page 87
Ù
Blocking a route section, see page 87
7.1 Adding a stage point during navigation
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 28.
Adding a stage point
during navigation…
At any moment during navigation you may add a new stage point
to your itinerary. The route will be recalculated in order to make
the new stage point the next destination to navigate to. The
other remaining stage points will be navigated to after the new
one.
Adding a stage
point… Precondition: The map is being displayed in navigation mode.
1.
Tap short on any place on the map.
2. Tap Set interim destination
The D
ESTINATION
screen opens.
3. Indicate the new stage point as described in "Indicating a
destination", page 40.
4. Tap the Set as route point button.
The route will be recalculated in order to make the new stage
point the next destination to navigate to.
Note: Select the new stage point directly on the map, just as
described in "Indicating destinations on the map", page 49. Tap
the respective place and hold. From the context menu, select
Add as route point.