Operator Function
©
Nautilus Hyosung, Inc.
All Rights Reserved. 121
[TCP/IP]
1) RMS STATUS SEND
- Display whether RMS STATUS SEND function is enabled or not.
- Set the value using
EN/DISABLE
button.
2) RMS INTERVAL
- Display “RMS STATUS SEND” cycle (unit: hours)
- Set the value using
INTERVAL
button. (Input the number from 1 to 24.)
3) URL EN/DISABLE
- Display whether to use URL or IP ADDRESS. If the value is ENABLE, that means
the ATM uses URL ADDRESS.
- Set the value using
URL EN/DISABLE
button.
4) RMS ADDRESS
- Display “RMS ADDRESS”.
- Set the value using
RMS ADDRESS
button. If you press this button, It goes to next
screen.
5) RMS LISTENNING PORT
- Display “RMS LISTENING PORT”.
- Set the value using
RMS LISTENING PORT
button. (Input the number from 0 to
65535)
- Default port is 9999