SW Installation
124
©
Nautilus Hyosung, Inc.
All Rights Reserved.
Auto Day Total
►
AUTO DAY TOTAL
feature allows the ATM to complete a Day Total operation (Without
actually closing out the machine) at a predetermined time each day. This is useful if you
are doing accounting of your ATM on a day-to-day basis. Your processor cuts off its
transactions each day at a set time. By enabling Auto Day Total at the same time, your
day’s balance should match the host. This information will appear as a journal record so,
you will need to access your journal to print or view the totals.
1) EN/DISABLE
- Display whether AUTO DAY TOTAL function is enabled or not.
- Set the value using
EN/DISABLE
button.
2) TOTAL TYPE
- Display AUTO DAY TOTAL TYPE
DAY TOTAL: ATM sends total to your processor then initialize total
TRIAL DAY TOTAL: ATM sends total to your processor
- Set the value using
TOTAL TYPE
button.
3) HOUR / MINUTE
- Display the time for the ATM to total itself
- Set the value using
HOUR
and
MINUTE
button.
