Nautel NX15, Руководство по эксплуатации и обслуживанию

Страница: 89 / 178

NX15/NX25 Operations and Maintenance Manual Operating the transmitter
Issue 6.0 2019-01-31 Page 2-65
The left-hand side of the
Scheduler
page displays a monthly calendar (e.g., April 2015). Use
the
<<
and
>>
buttons to navigate between months. Use the |
<
and
>|
buttons to navigate to the
beginning and the end of the schedule.
The right-hand side of the
Scheduler
page contains a
Rules
section and a
Daily Events
section.
All programmed rules are displayed in the
Rules
section. Clicking on a specific date in the
monthly calendar displays the rules, as applicable for that day, in the
Daily Events
section.
Editing scheduler rules
When you click in the
Rules
list, you have the option to edit or delete an existing rule, or to
create a new rule (up to a maximum of 63 rules). Click the
New
or
Edit
button to display the
Rule Explorer
window (see Figure 2.49 ). Click
Delete
to remove a rule from the list.
Figure 2.49: Rule Explorer window
NOTE
:
It is not possible to schedule an RF OFF state through the scheduler. However, it is
possible to “simulate” an RF OFF condition by creating a preset with a 0W setpoint. Once the
0W preset has been activated, after 10 seconds, the transmitter will shut down the RF power
modules, fans and B+ power supply, emulating an RF OFF state, but the transmitter will still
indicate RF ON.
When a new preset is later activated with a non-zero power setpoint, the transmitter will
resume operation as specified in the active preset.