Nautel NX15, Руководство по эксплуатации и обслуживанию

Страница: 104 / 178

NX15/NX25 Operations and Maintenance Manual Operating the transmitter
Page 2-80 Issue 6.0 2019-01-31
•
Port Number
- Enter the information that will identify the senders and receivers of
messages. Typically, this is set to 25 for SNMP systems.
•
Transmitter Name
- Enter an identification for the transmitter/station (e.g.,
NX300_WXYZ). This name will be included in notification emails.
•
Sender Email Address
- Enter as a standard email address (e.g., a@b.com), This is the
address that will appear in the “From:” line in any email notification received from
the transmitter. It should be an email registered with the email server.
NOTE
:
The sender email address’ domain (e.g., “.com”, “.ca”, “.info”, etc.) must be two
(2), three (3), four (4) or six (6) characters in length. Other character lengths are not
accepted
.
•
Authentication Required
- If your email server requires authentication to send emails,
click the check box and enter the appropriate Username and Password to allow
this. If the check box is not selected, the Username and Password fields do not
appear. Only TLS secured SMTP servers are supported.
•
Username
- Enter the username for your outgoing email server.
•
Password
- Enter the password or your outgoing email server.
NOTE
: The transmitter will automatically handle encryption if the associated mail server
requires it.
4. When complete click
Apply
or click
Cancel
to restore the previous settings. Use the
Test
button to enter an email address to test your settings. Enter the email address
destination for the test mail and click the
OK
button to send the test email or the
Cancel
button to return to the
Email Configuration
page.
5. Select a new
User Settings
option or press
X
to exit this page.