If the system is turned on, it flushes for 30 seconds, the display being as
(2).
After having been rinsed, pure water is produced, the display being as
(1).
When the pressure tank is full, the system stops, the display being as
(3).
A warning buzzer will be shown if the water supply lacks or the water supply pressure is too low,
the display being as
(4).
After two hours of pure water production, there is again a 30 second rinse.
In the event of the system working for an unusually long time, it is automatically switched off, in
which case a warning buzzer is activated, the display being as
(5).
If you press the button
(6)
for strong flushing (“Strong Washing”), the system is rinsed for 30
seconds.
RO controlbox
1. Digit diode
(1):
two indicator options: “E” = control beeps, “P” = control is silent
The function can be changed by pressing for 2 seconds the “STRONG WASHING”
button
(6).
2. The Digit diodes
(2), (3), (4)
show the TDS value. If the system flushes, the digit diodes
(3),
(4)
show the remaining seconds for rinsing
3. The digit diode
(5)
shows the system operating state. The explanation can be found on the
right controller side.
4. Press the button
(6)
to flush the system
https://www.naturewater.eu
Item 50808 and others
Page 9
11 2020
-1