background image

1. When the high pressure switch determines that the water pressure in-

side the tank is lower than the preset value, the system starts opera-
tiong.

2. The two last digits show the actual TDS value. The TDS value upper

limit is 100 ppm. If the value exceeds 100 ppm, the symbols 100 and
TDS flash one after another.

3. If the TDS value is higher than 50 and if the buzzer mode (E) is activ-

ated, a buzzer sounds.

4. The first  digit shows “E”  for the  buzzer mode and P for the mute

mode, the last which can be activated by pressing the “MUTE” but-
ton.

5. Both the probe and the control unit regulate possible deviations in the

measuring range; do not combine the system with other devices.

6. The   TDS   measurement   can   easily   be   perturbed.   Ensure   that   the

probe has been introduced to as sufficient depth inside the pipe to
guarantee accurate measuring results.

7. The presence of air bubbles inside the tubing system can influence

on the accuracy of the TDS measurement. Purge the pipes before
using the system.
(The   high   pressure   pump   works,   the   inlet   valve   opens,   the   outlet
valve closes.)

1. The system is activated and is rinsed for 30 seconds.
2. Cumulative water production for 6 hours; do not rinse the system dur-

ing that time, it will afterwards be rinsed automatically for 30 seconds.

3. Automatic rinsing for 30 seconds after the lack of water programme

having been finished.

4. The last two digits show the remaining back-flushing time, the clock

symbols flushes once per second.

5. The first digit shows “E” for the buzzer mode and “P” for the mute

mode, the last of which can be activated by pressing the “MUTE” but-
ton.

6. Rinse the system for 5 seconds before the water production and the

water tank filling.
(The   high   pressure   pump   works,   the   inlet   valve   opens,   the   outlet
valve closes.)

1. When the high pressure switch determines that the water pressure in-

side the water tank has reached to preset value, the water production
is stopped.

2. Shows the last measured TDS value during the water production or

rinsing. When the system does not produce any water, there is no

https://www.naturewater.eu

Item 50808 and others

Page 11 

  

11 2020

-1

Содержание 50808

















Отзывы: