Rinsing the RO membrane
When the RO membrane purifies the water, there is impurity and bacteria left on the surface of the
membrane, which may affect the quality and volume of the purified water. Thus the RO membrane
must be cleaned periodically. In our system, the RO membrane is automatically washed. One may
manually wash the membrane by turning on the flush valve
(L1)
for 2–3 minutes once a week.
Note:
In order to guarantee the efficient work of your system, please use the specified filters, provided
by the same vendor of the osmosis system.
Warning
1. Do not drink the water of first two tank contents; let it drain or use it for other purposes upon
installation. Test the RO unit for about 2 hours until the above operations is completed suc-
cessfully. Clean the remaining contaminants and sediment inside the unit. Check if the unit
works normally and without water leakage.
2. Do not take apart the parts of system. Any wrong operation may lead to water leakage and
system failure/damage.
3. Do not apply the system to purify hot water.
4. Do not place air valve discharged on the pressure tank.
5. To ensure the quality of purified water, please replace the first and the second filters after
10 months.
6. Please check the power supply and make sure it has a suitable voltage.
7.
Keep the RO unit away from sunshine.
8. When the system is not used for a long time, please turn off the power and shut off the ball
valve.
9. Follow the initial operation before reusing the system after a long time of non-use.
https://www.naturewater.eu
Item 50808 and others
Page 14
11 2020
-1
