To install the ball valve, fit a three way feed water connector
(A)
and place the ball valve
(B)
on the three way feed water connector
(A),
then connect the water-tap with three way feed
water connector (Pic. 1, 7 and 8).
To install the RO membrane: screw off the cap of RO housing
(J),
put the one end with two
sealing rings of RO membrane
(I)
first into the RO housing, screw on the cap tight.
The goose-neck water-tap
(Q)
should be positioned for good aesthetics, function and conveni-
ence; it connects to the outlet fitting of the mineral ball filter by means of the white plastic
hose.
To install the plastic hose at following positions according to technological process. There are
marks numbered 1, 2, 3, 4, on the
Reverse osmosis system layout and components
chart
(Pic. 1).
You can also find these marks on the RO machine.
Mark 1:
Between water tap and PPF filter
(C)
with white plastic hose.
Mark 2:
Installing a drain tubing white plastic hose linking to the off let of drain restrictor and
flush valve. Put the drain tubing to sewer or connect with a container for usual washing.
Mark 3:
Between the valve outlet
(M)
on water storage tank
(N)
and the Tee in front of post
bacteriostatic activated carbon filter
(P)
with white plastic hose.
Mark 4:
Between the goose-neck water-tap
(Q)
and the post bacteriostatic activated carbon
filter or mineral ball filter if available.
Method of connecting plastic hose with fittings
Cut a plastic hose after measuring.
Place the plastic hose into hexagon nut (Pic. 12).
Place white tube plug into the nozzle of plastic hose push the tube plug to the plastic hose end
by hand or tools (Pic. 12).
Place the plastic hose into the fittings (Pic. 12).
Screw on the hexagon nut tightly.
Method of connecting plastic hose with quick fittings (Pic. 10)
Cut a plastic hose after measuring.
Insert plastic hose deep into the quick fitting
Method of disconnecting the plastic hose from the quick fittings (Pic. 11)
Remove the small part
Press the round part until it touches the main body of quick fitting.
Pull the plastic hose.
Power cord.
This system is equipped with a transformer which uses single-phase power supply of 220 V
(see transformer voltage). To use it, please plug the power cord of transformer into power
supply socket.
https://www.naturewater.eu
Item 50808 and others
Page 7
11 2020
-1
